强激光辐照7075铝合金热响应与材料尺度律关系研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国防预研项目;中国科学院青促会项目(No.Y9A539C);长春光机所旭光人才计划项目资助


Thermal response of 7075 aluminum alloy with different scaling laws under high power laser
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了明确金属板受激光辐照产生的热响应与材料尺度律之间的关系。采用数值模拟和实验相结合的研究方法,开展了不同尺度律下7075铝合金板在波长为1064 nm的连续波激光辐照下的热响应研究。首先利用COMSOL有限元软件建立了金属板在连续激光辐照下的数值模型,得到不同尺度律的铝合金板的温升过程;之后开展同尺寸实验验证,对比数值仿真数据。研究结果表明:在等效时间内,不同尺度律模型温升过程一致;实验数据与仿真结果趋势相似,各尺度律下仿真与实验相对误差均小于17 %。该研究结果对于强激光辐照效应的应用与研究具有一定价值。

    Abstract:

    In order to clarify the relationship between the thermal response of the metal plate subjected to laser irradiation and the material scale law,the thermal response of different size 7075 aluminum alloy plates under continuous wave laser irradiation with a wavelength of 1064 nm was studied.Using numerical simulation method and experimental research method,the numerical model of metal plate temperature simulation was established by using COMSOL to obtain the temperature field distribution of metal plates of different sizes.After that,the experimental verification,analysis and comparison simulation results and experiments of the same size were carried out.The results show that the temperature rise process of different scale law models is consistent during the equivalent time;the experimental data is similar to the simulation result.The relative error between simulation and experiment under each scale law is less than 17 %.The research results have certain practical value for the engineering research of strong laser irradiation effect.

    参考文献
    相似文献
    引证文献
引用本文

李成龙,汤伟,邵俊峰,郑长彬,李雪雷,郭劲.强激光辐照7075铝合金热响应与材料尺度律关系研究[J].激光与红外,2020,50(7):789~794

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-08-05
  • 出版日期: